5

2016© Integrated Device Technology, Inc.

Revision E, January 5, 2016

8545 Datasheet

AC Electrical Characteristics

NOTE 2: Defined as skew between outputs at the same supply voltage and with equal load conditions.

NOTE 3: Defined as skew between outputs on different devices operating at the same supply voltages and with equal load conditions. Using

the same type of inputs on each device, the outputs are measured at the differential cross points.

NOTE 4: This parameter is defined in accordance with JEDEC Standard 65.

Symbol

Parameter

Test Conditions

Minimum

Typical

Maximum

Units

Differential Output Voltage

200

280

360

mV

V

OD

40

mV

Offset Voltage

1.125

1.25

1.375

V

V

OS

525

mV

High Impedance Leakage

-10

±1

+10

µA

Power Off Leakage

-20

±1

+20

µA

Differential Output Short Circuit Current

-3.5

-5

mA

Output Short Circuit Current

-3.5

-5

mA

Output Voltage High

1.34

1.6

V

Output Voltage Low

0.9

1.06

V

Symbol

Parameter

Test Conditions

Minimum

Typical

Maximum

Units

Output Frequency

650

MHz

Propagation Delay; NOTE 1

ƒ 650MHz

1.4

3.6

ns

tjit

Buffer Additive Phase Jitter, RMS; refer

to Additive Phase Jitter Section

156.25MHz, Integration Range:

12kHz – 20MHz

0.13

ps

tsk(o)

Output Skew; NOTE 2, 4

40

ps

tsk(pp)

Part-to-Part Skew; NOTE 3, 4

500

ps

Output Rise/Fall Time

20% to 80% @ 50MHz

200

400

600

ps

odc

Output Duty Cycle

45

50

55

%