| Electronic Components Datasheet Search |
|
AX88178 Datasheet(PDF) 21 Page - ASIX Electronics Corporation |
|
|
|||||||||||||||||||||||||||||
AX88178 Datasheet(HTML) 21 Page - ASIX Electronics Corporation |
|
21 / 35 page ![]() ASIX ELECTRONICS CORPORATION 21 AX88178 L USB to 10/100/1000 Gigabit Ethernet/HomePNA Controller 6.2.1.18 Medium Status Register (1Ah, read only) and Medium Mode Register (1Bh, write only) Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 PF JFE TFC RFC ENCK AC FD GM Reserved SM SBP Reserved PS RE AA [7:0] = {PF, JFE, TFC, RFC, EN125, AC, FD, GM}. BB [7:0] = {Reserved, SM, SBP, JE, PS, RE}. GM: Gigabit Mode. 1: GMII mode. 0: MII mode (default). PS: Port Speed in MII mode 1: 100 Mbps (default). 0: 10 Mbps. {GM, PS} RGMII/MII/GMII port speed selection 00: 10Mbps 01: 100Mbps 10: 1000Mbps 11: 1000Mbps FD: Full Duplex mode 1: Full Duplex mode (default). 0: Half Duplex mode. AC: Reserved bit. For normal operation, please always write 1 to this bit. ENCK: Enable GTX_CLK and TXC clock outputs 1: Enable. 0: Disabled (default). ENCK RGMII_EN GTX_CLK TXC 0 0 OFF OFF 0 1 OFF OFF 1 0 ON OFF 1 1 OFF ON RFC: RX Flow Control enable. 1: Enable receiving of pause frame on RX direction during full duplex mode (default). 0: Disabled. TFC: TX Flow Control enable. 1: Enable transmitting pause frame on TX direction during full duplex mode (default). 0: Disabled. JFE: Jumbo Frame Enable. 1: Enable the support of Jumbo frame in Gigabit mode (default). 0: Disabled. PF: Check only “length/type” field for Pause Frame. 1: Enable, i.e., Pause frames are identified only based on L/T filed. 0: Disabled, i.e., Pause frames are identified based on both DA and L/T fields (default). RE: Receive Enable. 1: Enable RX path of the ASIC. 0: Disabled (default). SBP: Stop BackPressure. 1: When TFC bit = 1, setting this bit enables backpressure on TX direction “continuously” during RX buffer full condition in half duplex mode. 0: When TFC bit = 1, setting this bit enable backpressure on TX direction “intermittently” during RX buffer full condition in half duplex mode (default). SM: Super Mac support. 1: Enable Super Mac to shorten exponential back-off time during transmit retry. 0: Disabled (default). |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |