| Electronic Components Datasheet Search |
|
DSP56857 Datasheet(PDF) 396 Page - Freescale Semiconductor, Inc |
|
|
|||||||||||||||||||||||||||||
DSP56857 Datasheet(HTML) 396 Page - Freescale Semiconductor, Inc |
|
396 / 662 page ![]() Register Description (TOD_BASE = $1FFFC0) 5685X Digital Signal Controller User Manual, Rev. 4 14-10 Freescale Semiconductor 14.6.2.7 Time-of-Day Minutes Alarm Enable (TODMA)—Bit 5 • 0 = Alarm interrupt ignores minutes counter • 1 = Alarm interrupt requires match of minutes alarm register to minutes counter 14.6.2.8 Time-of-Day Seconds Alarm Enable (TODSA)—Bit 4 • 0 = Alarm interrupt ignores seconds counter • 1 = Alarm interrupt requires match of seconds alarm register to seconds counter 14.6.2.9 Time-of-Day Seconds Interrupt Enable (TODSEN)—Bit 3 • 0 = Disables TOD seconds interrupt • 1 = Enables TOD seconds interrupt 14.6.2.10 Time-of-Day Alarm Interrupt Enable (TODAEN)—Bit 2 • 0 = Disables TOD alarm interrupt • 1 = Enables TOD alarm interrupt 14.6.2.11 Time-of-Day Lock (TOD_LOCK)—Bit 1 When set, this bit prevents the time registers from automatically updating to the current value of the time counters while the TOD module is enabled. It is used to avoid register updates while in the process of reading out the four time registers. It should be set only when in process of reading the current time while the TOD module is enabled. • 0 = TOD registers not locked • 1 = TOD registers locked 14.6.2.12 Time-of-Day Enable (TODEN)—Bit 0 Writing zero to TODEN disables the time-of-day counting; the time registers will contain the final value of the time counters and the registers become writable. When this field is written with 1, the seconds, minutes, hours, and days counters are loaded from the corresponding register and proceed to count in a normal time-of-day basis with seconds overflow incrementing minutes, minutes overflow incrementing hours, and so on through days overflow wrapping back to zero. While time-of-day counting is enabled, the seconds, minutes, hours, and day registers update with a two IPBus clock delay to the value of the corresponding counter, so reading the registers returns the current time-of-day. In this mode, writing seconds register, minutes register, hour register and days register, or clock scaler is disabled. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |