VSC8151 datasheet(21/30 Pages) VITESSE

21 / 30 page

Page 21

12/1/99

741 Calle Plano, Camarillo, CA 93012 • 805/388-3700 • FAX: 805/987-5896

VITESSE

SEMICONDUCTOR CORPORATION

Advance Product Information

VSC8151

2.488Gb/s SONET/SDH

STS-48/STM-16 Section Terminator

G52225-0, Rev. 2.9

Absolute Maximum Ratings

Power Supply Voltage (VCC) Potential to GND ............................................................................-0.5 V to +4.3 V

Power Supply Voltage (VMM) Potential to GND ...........................................................................-0.5 V to +3.0 V

TTL Input Voltage Applied ..........................................................................................................-0.5 V to + 5.5V

ECL Input Voltage Applied ...................................................................................................+0.5 V to VTT -0.5 V

Output Current (IOUT)................................................................................................................................... 50 mA

Case Temperature Under Bias (TC) ................................................................................................-55

o to + 125oC

Storage Temperature (TSTG) ...........................................................................................................-65

o to + 150oC

Note: Caution: Stresses listed under “Absolute Maximum Ratings” may be applied to devices one at a time without causing per-

manent damage. Functionality at or exceeding the values listed is not implied. Exposure to these values for extended

periods may affect device reliability.

Recommended Operating Conditions

Power Supply Voltages (VCC)...............................................................................................................+3.3V ±5 %

Power Supply Voltages (VMM)..............................................................................................................+2.0V ±5 %

Commercial Operating Temperature Range* (T).................................................................................. 0o to 85oC

Notes: (1)Lower limit of specification is ambient temperature and upper limit is case temperature.

(2)Customer must use air cooled/heatsink environment to meet thermal requirements of the package.

(3)Suggested power up of 8151 is +2.0V supply first, then +3.3V supply.

ESD Ratings

Proper ESD procedures should be used when handling this product. The VSC8151 is rated to the following

ESD voltages based on the human body model:

1. All pins are rated at or above 1500V.

VSC8151 Datasheet(PDF) 21 Page - Vitesse Semiconductor Corporation

VSC8151 Datasheet(HTML) 21 Page - Vitesse Semiconductor Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Datasheet Download

Link URL