WF10P1002JTLJ datasheet(8/9 Pages) WALSIN

8 / 9 page

Approval sheet

Page 8 of 8

ASC_WFxxP_J_V03

DEC 2016

Terminal strength

AEC-Q200-006

Pressurizing force: 1Kg, Test time: 60±1sec.

remarkable

damage

removal of the terminations

Thermal shock

MIL-STD-202

method 107

Test –55 to 155℃/ dwell time 15min/ Max transfer time

20sec 300cycles

∆R/R max. ±(1.0%+0.05Ω)

No visible damage

ESD

AEC-Q200-002

Test contact 1.0KV (0.5KV for 0402 only)

∆R/R max. ±(1.0%+0.05Ω)

No visible damage

Mechanical Shock

MIL-STD-202

method 213

Test ½ Sine Pulse, Peak value: 100g, normal duration:

6ms, Velocity change:12.3ft/sec. Three shocks in each

direction, total 18 shocks.

Within product specification

tolerance and no visible damage.

Vibration

MIL-STD-202

method 204

Test 5g’s for 20 min., 12 cycles each of 3 orientations.

△R/R max. ±(1%+0.05Ω) and

no visible damage

Resistance to Solvents :

MIL-STD-202

Method 215

Solvent is Isopropyl alcohol, immersion 3mins at 25℃

and brush 10 strokes with a toothbrush with a handle

made of a non-reactive material (wet bristle), immersion

and brush 3 times and then air blow dry.

No superficial defect on marking,

encapsulation, coating,

appearance. Electrical

characteristics within products

specification and tolerance.

Inspect at 3X max. for marking,

inspect at 10X for part damage.

External Visual

MIL-STD-883

method 2009

Electrical test not required. Inspect device construction,

marking and workmanship

No visual damage and refer

WTC marking code.

Physical Dimension

JESD22

method JB-100

Verify physical dimensions(L, W, T, Tb, Tt)

Within the specified tolerance for

WTC.

WF10P1002JTLJ Datasheet(PDF) 8 Page - WALSIN TECHNOLOGY CORPORATION

WF10P1002JTLJ Datasheet(HTML) 8 Page - WALSIN TECHNOLOGY CORPORATION

Html Pages

1 2 3 4 5 6 7 8 9

Datasheet Download

Link URL