Extended Video (optional)

Trigger on 480p/60, 576p/50, 720p/30, 720p/50, 720p/60, 875i/60, 1080i/50, 1080i/60, 1080p/24, 1080p/24sF, 1080p/25, 1080p/

30, 1080p/50, 1080p/60, and custom bi-level and tri-level sync video standards.

Custom bi-level and tri-level sync video standards.

Parallel (requires option

MDO4MSO)

Trigger on a parallel bus data value. Parallel bus can be from 1 to 20 bits (from the digital and analog channels) in size. Binary and

Hex radices are supported.

Acquisition system

Acquisition modes

Sample

Acquire sampled values.

Peak Detect

Captures glitches as narrow as 800 ps (MDO4104C with option SA3 or SA6 and ≤ 2 channels enabled or MDO4104C without SA3

or SA6) or 1.6 ns MDO4104C with option SA3 or SA6 and ≥ 3 channels enabled and all other models) at all sweep speeds

Averaging

From 2 to 512 waveforms included in average.

Envelope

Min-max envelope reflecting Peak Detect data over multiple acquisitions. Number of waveforms in the envelope selectable

between 1 and 2000 and infinity

Hi Res

Real-time boxcar averaging reduces random noise and increases vertical resolution.

Roll

Scrolls waveforms right to left across the screen at sweep speeds slower than or equal to 40 ms/div.

FastAcq optimizes the instrument for analysis of dynamic signals and capture of infrequent events, capturing >340,000 wfms/s on

1 GHz models and >270,000 wfms/s on 200 MHz - 500 MHz models.

Waveform measurements

Cursors

Waveform and Screen

DC measurement accuracy

±((DC Gain Accuracy) * |reading - (Offset - Position)| + Offset Accuracy + 0.15 div + 0.6 mV)

Automatic measurements

(time domain)

30, of which up to eight can be displayed on-screen at any one time. Measurements include: Period, Frequency, Delay, Rise Time,

Fall Time, Positive Duty Cycle, Negative Duty Cycle, Positive Pulse Width, Negative Pulse Width, Burst Width, Phase, Positive

Overshoot, Negative Overshoot, Total Overshoot, Peak to Peak, Amplitude, High, Low, Max, Min, Mean, Cycle Mean, RMS, Cycle

RMS, Positive Pulse Count, Negative Pulse Count, Rising Edge Count, Falling Edge Count, Area and Cycle Area.

Automatic measurements

(frequency domain)

3, of which one can be displayed on-screen at any one time. Measurements include Channel Power, Adjacent Channel Power

Ratio (ACPR), and Occupied Bandwidth (OBW)

Measurement statistics

Mean, Min, Max, Standard Deviation.

Reference levels

User-definable reference levels for automatic measurements can be specified in either percent or units.

Gating

Isolate the specific occurrence within an acquisition to take measurements on, using either the screen or waveform cursors.

Waveform histogram

A waveform histogram provides an array of data values representing the total number of hits inside of a user-defined region of the

display. A waveform histogram is both a visual graph of the hit distribution as well as a numeric array of values that can be

measured.

Sources

Channel 1, Channel 2, Channel 3, Channel 4, Ref 1, Ref 2, Ref 3, Ref 4, Math

Types

Vertical, Horizontal

Waveform histogram

measurements

12, of which up to eight can be displayed on-screen at any one time. Waveform Count, Hits in Box, Peak Hits, Median, Max, Min,

Peak-to-Peak, Mean, Standard Deviation, Sigma 1, Sigma 2, Sigma 3

MDO4000C Series Oscilloscope

Trigger system

www.tek.com 23