Software

Enables fast and easy communication between a Windows PC and your oscilloscope using USB or LAN. Transfer and save

settings, waveforms, measurements, and screen images. Included Word and Excel toolbars automate the transfer of acquisition

data and screen images from the oscilloscope into Word and Excel for quick reporting or further analysis. Download from

www.tek.com/software/downloads.

IVI driver

Provides a standard instrument programming interface for common applications such as LabVIEW, LabWindows/CVI,

MicrosoftNET, and MATLAB.

Enables control of the oscilloscope over a network connection through a standard web browser. Simply enter the IP address or

network name of the oscilloscope and a web page will be served to the browser. Transfer and save settings, waveforms,

measurements, and screen images or make live control changes to settings on the oscilloscope directly from the web browser.

LXI Web interface

Connect to the oscilloscope through a standard Web browser by simply entering the oscilloscope's IP address or network name in

the address bar of the browser. The Web interface enables viewing of instrument status and configuration, status and modification

of network settings, and instrument control through the e*Scope Web-based remote control. All Web interaction conforms to LXI

Core specification, version 1.4.

Power source

Power source voltage

100 to 240 V ±10%

Power source frequency

50 to 60 Hz ±10% at 100 to 240 V ±10%

400 Hz ±10% at 115 V ±13%

Power consumption

250 W maximum

Physical characteristics

Dimensions

mm

in

Height

229

9

Width

439

17.3

Depth

147

5.8

Weight

Instruments without option

SA3 or SA6

kg

lb

Net

5.1

11.2

Shipping

10.8

23.8

Instruments with option SA3

or SA6

kg

lb

Net

5.5

12.2

Shipping

11.2

24.8

Rackmount configuration

5U

Cooling clearance

2 in. (51 mm) required on left side and rear of instrument

Datasheet

36 www.tek.com