VSC8221HH datasheet(89/138 Pages) MICROSEMI

89 / 138 page

VSC8221

Data Sheet

VMDS-10106 Revision 4.1

December 2006

89 of 106

106

25.15 – interrupt Pin Enable

When bit 25.15 is set to “1”, the hardware interrupt is enabled, meaning that the state of the external interrupt pin (MDiNT) can

be influenced by the state of the interrupt Status bit (26.15). When bit 25.15 is set to “0”, the interrupt status bits (Register 26)

continue to be set in response to interrupts, but the interrupt hardware pin MDiNT on the VSC8221 will not be influenced by this

particular PHY.

25.14 – Reserved

25.13 – Link State-Change interrupt Mask

When bit 25.13 is set to “1”, the Link State-Change / Energy Detect interrupt is enabled.

25.12 – Reserved

25.11 – Auto-Negotiation Error interrupt Mask

When bit 25.11 is set to “1”, the Auto-Negotiation Error interrupt is enabled.

25.10 – Auto-Negotiation-Done / interlock Done interrupt Mask

When bit 25.10 is set to “1”, the Auto-Negotiation-Done interrupt is enabled.

25.9 – inline Powered Device Detected interrupt Mask

When bit 25.9 is set to “1”, the inline Powered Device Detected interrupt is enabled.

25.8 – Symbol Error interrupt Mask

When bit 25.8 is set to “1”, the Symbol Error interrupt is enabled.

25.7 – Descrambler Lock-Lost interrupt Mask

When bit 25.7 is set to “1”, the Descrambler Lock-Lost interrupt is enabled.

25.6 – TX FiFO interrupt Mask

When bit 25.6 is set to “1”, the TX FiFO interrupt is enabled.

TX FiFO interrupt Mask

R/W

1 = Enable TX FiFO interrupt

0 = Disable TX FiFO interrupt

RX FiFO interrupt Mask

R/W

1 = Enable RX FiFO interrupt

0 = Disable RX FiFO interrupt

Reserved

False Carrier interrupt Mask

R/W

1 = Enable False Carrier interrupt

0 = Disable False Carrier interrupt

Cable impairment Detect interrupt

Mask

R/W

1 = Enable Cable impairment Detect interrupt

0 = Disable Cable impairment Detect interrupt

MASTER/SLAVE Resolution Error

interrupt Mask

R/W

1 = Enable MASTER/SLAVE interrupt

0 = Disable MASTER/SLAVE interrupt

RXER interrupt Enable

R/W

1 = Enable RX_ER interrupt

0 = Disable RX_ER interrupt

Bit

Name

Access States

Reset

Value

Sticky

VSC8221HH Datasheet(PDF) 89 Page - Microsemi Corporation

VSC8221HH Datasheet(HTML) 89 Page - Microsemi Corporation

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL