SH7041A datasheet(192/923 Pages) RENESAS

Part #	SH7041A

Description	Renesas 32-Bit Single-Chip RISC Microprocessor SuperH RISC engine Family/SH7040 Series(CPU Core SH-2)

PDF	923 Pages

Scroll/Zoom	100%

Manufacturer	RENESAS [Renesas Technology Corp]

Direct Link	http://www.renesas.com

Logo

192 / 923 page

154

5. The RDRF flag of the SSR is set to 1 by each completion of a 1-byte data reception by the SCI,

an RxI interrupt is generated, and the DTC is activated. The received data is transferred from

RDR to RAM by the DTC, and the RDRF flag is 0 cleared.

6. After completion of 128 data transfers (DTCRA = 0), the DTER is cleared while the RDRF is

maintained as 1, and an RxI interrupt request is made to the CPU. The interrupt processing

routine clears the RDRF, and performs the other completion processing.

8.4

Cautions on Use

• DMAC and DTC register access by the DTC is prohibited.

• DTC register access by the DMAC is prohibited.

• When setting a bit in DTER, first ensure that all transfers on the DTC channel corresponding to

that DTER have ended, or disable the transfer source for each channel so that DTC transfer

corresponding to that DTER will not occur. The above restrictions do not apply for A mask

due to change in the access method of DTER. However, take caution when changing LSI to A

mask, since modification of the program is required.

SH7041A Datasheet(PDF) 192 Page - Renesas Technology Corp