MAN-MDEV-FFF-PRO-UG datasheet(24/40 Pages) LINX

24 / 40 page

–

The Command Set tab (Figure 21) allows specific commands to be written

to the module.

1. The Command box shows the hexadecimal values that are written to

the module. Values can be typed into the box or a command can be

selected from the Commands menu.

2. The Response box shows the hexadecimal values that are returned

from the module in response to a command.

3. The Commands drop-down menu shows all of the commands that

are available for the active module (Figure 22). Selecting one of the

commands from this menu automatically fills in the Command box. The

values can be adjusted by typing in the box.

4. The Items drop down menu displays all of the items that are available

for the active module (Figure 23). Selecting one of the items from

this menu automatically fills in the Command box. The values can be

adjusted by typing in the box.

5. Clicking Send writes the values in the Command box to the module.

6. The structure of the selected command and its response is shown in

the main window. Please see the HumPRO™ Series Transceiver Data

Guide for definitions of each value.

7. The Show Commands button opens a window that shows the bytes

sent to the module and the responses from the module (Figure 24).

Figure 21: The Master Development System Software Command Set Tab

MAN-MDEV-FFF-PRO-UG Datasheet(PDF) 24 Page - Linx Technologies