ADM1041 datasheet(13/64 Pages) AD

13 / 64 page

ADM1041

Rev. A | Page 13 of 64

ABSOLUTE MAXIMUM RATINGS

Table 2.

Parameter

Rating

Supply Voltage (Continuous), VDD

6.5 V

Data Pins SDA, SCL, VDATA

VDD + 0.5 V,

GND − 0.3 V

Continuous Power at 25°C, PD-QSOP24

450 mW

Operating Temperature, TAMB

−40°C to +85°C

Junction Temperature, TJ

150°C

Storage Temperature, TSTG

−60°C to +150°C

Lead Temperature

(Soldering, 10 Seconds), TL

300°C

ESD Protection on All Pins, VESD

2 kV

Thermal Resistance, Junction to Air, θJA

150°C/W

ICT Source Current1

7 mA

1 This is the maximum current that can be sourced out from Pin 8 (ICT pin).

Thermal Characteristics

24-Lead QSOP Package:

θJA = 150°C/W

Stresses above those listed under Absolute Maximum Ratings

may cause permanent damage to the device. This is a stress

rating only; functional operation of the device at these or any

other conditions above those indicated in the operational

section of this specification is not implied. Exposure to absolute

maximum rating conditions for extended periods may affect

device reliability.

ESD CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on

the human body and test equipment and can discharge without detection. Although this product features

proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy

electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance

degradation or loss of functionality.

ADM1041 Datasheet(PDF) 13 Page - Analog Devices

ADM1041 Datasheet(HTML) 13 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64

Datasheet Download

Link URL