ESP32C3 datasheet(13/44 Pages) ESPRESSIF

13 / 44 page

Pin Definition

VDDA,

VDD3P3,

VDD3P3_RTC,

VDD3P3_CPU

CHIP_EN

IL_nRST

2.8 V

Figure 5: ESP32C3 Powerup and Reset Timing

Table 3: Description of ESP32C3 Powerup and Reset Timing Parameters

Min

Parameter

Description

(µs)

Time between bringing up the VDDA, VDD3P3, VDD3P3_RTC, and

VDD3P3_CPU rails, and activating CHIP_EN

Duration of CHIP_EN signal level < VIL_nRST (refer to its value in

Table 14) to reset the chip

2.4 Strapping Pins

ESP32-C3 has three strapping pins:

• GPIO2

• GPIO8

• GPIO9

Software can read the values of GPIO2, GPIO8 and GPIO9 from GPIO_STRAPPING field in GPIO_STRAP_REG

ESP32-C3 Technical Reference Manual.

During the chip’s system reset, the latches of the strapping pins sample the voltage level as strapping bits of ”0”

or ”1”, and hold these bits until the chip is powered down or shut down.

Types of system reset include:

• power-on reset

• RTC watchdog reset

• brownout reset

• analog super watchdog reset

• crystal clock glitch detection reset

By default, GPIO9 is connected to the internal weak pull-up resistor. If GPIO9 is not connected or connected to

an external high-impedance circuit, the latched bit value will be ”1”

Espressif Systems

Submit Documentation Feedback

ESP32-C3 Series Datasheet v1.1

ESP32C3 Datasheet(PDF) 13 Page - ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD.