L3G4IS

Image stabilization (OIS mode) specifications

Doc ID 022612 Rev 1

15/24

5.4

Absolute maximum ratings

Stresses above those listed as “absolute maximum ratings” may cause permanent damage

to the device. This is a stress rating only and functional operation of the device under these

conditions is not implied. Exposure to maximum rating conditions for extended periods may

affect device reliability.

Table 11.

Absolute maximum ratings(1)

1.

Supply voltage on any pin should never exceed 4.8 V.

Symbol

Ratings

Maximum value

Unit

AVdd

Supply voltage

-0.3 to 4.8

V

HAVdd

Supply voltage

-0.3 to 4.8

V

Vdd_IO_

SPI

Vdd IO SPI interface

-0.3 to HAVdd +0.1

V

Vin(UI)

Input voltage on:

(SCL, SDA, INT, DRDY)

-0.3 to AVdd +0.1

V

Vin(OIS)

Input voltage on:

(CS_OIS, SDI/SDO_OIS, SCL_OIS)

-0.3 to Vdd_IO_SPI

+0.1

V

TSTG

Storage temperature range

-40 to +125

°C

Sg

Acceleration g for 0.1 ms

10,000

g

ESD

Electrostatic discharge protection

2 (HBM)

kV

1.5 (CDM)

kV

200 (MM)

V

This is a mechanical shock sensitive device, improper handling can cause permanent

damage to the part.

This is an ESD sensitive device, improper handling can cause permanent damage to

the part.