7 Specifications

7.1 Absolute Maximum Ratings

Over the recommended operating junction temperature range(1)

PARAMETER

MIN

MAX

UNIT

Voltages

Transient VIN to AGND, PGND(2)

–0.3

42

V

Voltages

Continuous VIN to AGND, PGND(2)

–0.3

36

V

Voltages

SW to AGND, PGND

–0.3

VIN + 0.3

V

Voltages

RBOOT, CBOOT to SW

–0.3

5.5

V

Voltages

Transient EN to AGND, PGND(2)

–0.3

42

V

Voltages

Continuous EN to AGND, PGND(2)

–0.3

36

V

Voltages

BIAS to AGND, PGND

–0.3

16

V

Voltages

FB to AGND, PGND: Adjustable Versions

–0.3

5.5

V

Voltages

RESET to AGND, PGND

0

20

V

Current

RESET sink current(4)

0

10

mA

Voltages

RT to AGND, PGND

-0.3

5.5

V

Voltages

VCC to AGND, PGND

–0.3

5.5

V

Voltages

PGND to AGND(3)

–1

2

V

Tstg

Storage temperature

–65

150

°C

(1)

Operation outside the Absolute Maximum Ratings may cause permanent device damage. Absolute Maximum Ratings do not imply

functional operation of the device at these or any other conditions beyond those listed under Recommended Operating Conditions.

If used outside the Recommended Operating Conditions but within the Absolute Maximum Ratings, the device may not be fully

functional, and this may affect device reliability, functionality, performance, and shorten the device lifetime.

(2)

A maximum of 42V can be sustained at this pin for duration of ≤100ms at a duty cycle of ≤0.01%. 36 V can be sustained for the life of

this device.

(3)

This specification applies to voltage durations of 100 ns or less. The maximum D.C. voltage should not exceed +/- 0.3V.

(4)

Do not exceed pin 's voltage rating.

7.2 ESD Ratings

VALUE

UNIT

V(ESD)

Electrostatic discharge

Human-body model (HBM), per ANSI/ESDA/

JEDEC JS-001(1)

±2000

V

Charged-device model (CDM), per ANSI/ESDA/

JEDEC JS-002(2)

±750

V

(1)

JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.

(2)

JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.

7.3 Recommended Operating Conditions

Over the recommended operating junction temperature range of –40°C to 125°C (unless otherwise noted) (1)

MIN

MAX

UNIT

Input voltage

Input Voltage Range(1)

3

36

V

Output voltage Output Adjustment Range for adjustable output versions (2)

1

10

V

Frequency

Frequency adjustment range

200

2200

kHz

Sync

Frequency

Synchronization frequency range

200

2200

kHz

Output current IOUT, TLVM13610

0

8

A

Temperature

Operating junction temperature, TJ

–40

125

°C

(1)

3.7 V is required at VIN for start-up, an extended input voltage range down to 3.0 V is possible after start-up; See Minimum Input

Voltage for start-up conditions.

(2)

Under no conditions should the output voltage be allowed to fall below zero volts.

www.ti.com

TLVM13610

SLVSH63 – FEBRUARY 2023

Copyright © 2023 Texas Instruments Incorporated

Submit Document Feedback

5

Product Folder Links: TLVM13610