IDT80KSW0002

Datasheet

CPS-16 Datasheet

47

April 6, 2016

JTAG Timing Waveforms

Figure 27 JTAG Timing Specifications

NOTES:

1. Device inputs = All device inputs except TDI, TMS, and TRST.

2. Device outputs = All device outputs except TDO.

18 Reset & Initialization

Power Supply Sequencing

The CPS-16 does not require specific power sequencing between any of the core and I/O supplies.

Reset Pin and Timing

Figure 28 Reset Timing

To reset the device, first reset signal has to be de-asserted (Reset Low), and it is asserted after 5 REF_CLK cycles. 4096 REF_CLK cycles later, the

device completes the reset process. Once completed, access to the CPS-16 from any and all interfaces is possible and the CPS-16 is fully functional.

Control and data traffic will not be accepted by the CPS-16 until this process is fully completed.

TCK

Device Inputs(1)/

TDI/TMS

Device Outputs(2)/

TDO

TRST

tJCD

tJDC

tJRST

tJS

tJH

tJCYC

tJRSR

tJF

tJCL

tJR

tJCH

5686 drw 08

,

RST

5 REF_CLK Cycles

4096 REF_CLK Cycles