| Electronic Components Datasheet Search |
|
STM32H7 Datasheet(PDF) 241 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32H7 Datasheet(HTML) 241 Page - STMicroelectronics |
|
241 / 357 page ![]() DS12110 Rev 10 241/357 STM32H742xI/G STM32H743xI/G Electrical characteristics (rev V) 320 Designing hardened software to avoid noise problems EMC characterization and optimization are performed at component level with a typical application environment and simplified MCU software. It should be noted that good EMC performance is highly dependent on the user application and the software in particular. Therefore it is recommended that the user applies EMC software optimization and prequalification tests in relation with the EMC level requested for his application. Software recommendations The software flowchart must include the management of runaway conditions such as: • Corrupted program counter • Unexpected reset • Critical Data corruption (control registers...) Prequalification trials Most of the common failures (unexpected reset and program counter corruption) can be reproduced by manually forcing a low state on the NRST pin or the Oscillator pins for 1 second. To complete these trials, ESD stress can be applied directly on the device, over the range of specification values. When unexpected behavior is detected, the software can be hardened to prevent unrecoverable errors occurring (see application note AN1015). Electromagnetic Interference (EMI) The electromagnetic field emitted by the device is monitored while a simple application, executing EEMBC code, is running. This emission test is compliant with SAE IEC61967-2 standard which specifies the test board and the pin loading. Table 153. EMI characteristics for fHSE = 8 MHz and fCPU = 400 MHz Symbol Parameter Conditions Monitored frequency band Value Unit SEMI Peak (1) VDD = 3.6 V, TA = 25 °C, UFBGA240 package, compliant with IEC61967-2 0.1 MHz to 30 MHz 11 dBµV 30 MHz to 130 MHz 6 130 MHz to 1 GHz 12 1 GHz to 2 GHz 7 Level (2) 0.1 MHz to 2 GHz 2.5 - 1. Refer to AN1709 “EMI radiated test” chapter. 2. Refer to AN1709 “EMI level classification” chapter. |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |