SL2S3003TTFUD datasheet(3/82 Pages) NXP

3 / 82 page

NXP Semiconductors

SL2S3003/SL2S3003TT

ICODE 3 (TagTamper)

2 Features and benefits

2.1 ICODE 3 RF interface (ISO/IEC 15693)

• SELFAdjust feature for optimal RF performance

The ICODE 3 has an automatic mechanism implemented which adjusts the RF performance to the optimum in

the operated environment. The adjustment is performed at start-up.

• Contactless transmission of data and power (no battery needed)

• Operating distance of up to 1.5 m (depending on the antenna geometry)

• Operating frequency of 13.56 MHz (ISM, worldwide license freely available)

• Fast data transfer of up to 212 kbit/s

• High data integrity: 16-bit CRC, framing

• True anticollision feature

• Persistent quiet mode to enable faster inventory speed

• Write distance equal to read distance

2.2 EEPROM

• 2432 bits of user memory organized in 76 blocks of 4 bytes each. The last block is reserved for the 24-bit

counter feature.

• 50 years of data retention

• Write endurance of 100000 cycles

2.3 Data protection

• 8-byte unique identifier

• 32-byte or 48-byte programmable originality signature

• Lock mechanism for each user memory block (write protection), and lock protection pointer for fast locking

• Lock mechanism for DSFID, AFI, EAS

• Password (32-bit) protected memory management for Read access

• Password (32-bit) protected memory management for Write access

• Password (32-bit) protected label Destroy

• Password (32-bit) protected privacy mode

• Password (32-bit) protected EAS and AFI functionality

• Password (32-bit) protected memory configuration

• 24-bit counter (NFC counter, or command-based counter with optional password protection)

• Programmable open TagTamper message only visible after the detection of the first open event

SL2S3003/SL2S3003TT

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 3.0 — 28 March 2024

3 / 82

SL2S3003TTFUD Datasheet(PDF) 3 Page - NXP Semiconductors