2

© KEMET Electronics Corporation • One East Broward Boulevard

A4123_PHH223 • 6/18/2024

Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com

Hybrid Radial Crown Capacitors – PHH223, +125°C, Hybrid Radial Crown, UL ESR, AEC-Q200

Performance Characteristics

Item

Performance Characteristics

Capacitance Range

540 – 8700 μF

Rated Voltage

25 - 63 VDC

Operating Temperature

−40 to +125°C

Capacitance Tolerance

−20/+20%, at 100 Hz/+20°C

Operational Lifetime

Rated Voltage and I

RAC at Tcase

90°C/100kHz (hours)

Rated Voltage and I

RAC at Tcase

105°C/100kHz

Rated Voltage and I

RAC at Tcase

125°C/100kHz (hours)

≥ 3,000

≥ 2,000

End of Life Requirement

∆ C/C < ±30%, ESR < 3 x initial ESR value, IL < initial specified limit

Surge Voltage

1.15 x V

R

High Temperature Storage

After storage for 1,000 hours at +125°C with no voltage applied and then being

stabilized at +20°C, capacitors shall meet the limits specified in Endurance.

Leakage Current

I = 0.005 CV (μA)

C = rated capacitance (μF), V = rated voltage (VDC). Voltage applied for 5 minutes at +20°C.

Vibration Test

Specifications

Procedure

Requirements

1.5 mm displacement amplitude or

20 g maximum acceleration. Vibration applied

for three 22-hour sessions at 10 – 2,000 Hz

(capacitor clamped by body).

No leakage of electrolyte or

other visible damage. Deviations

in capacitance from initial

measurements must not exceed:

∆ C/C < 5%

Standards

AEC–Q200; IEC 60384–4 long life grade 40/125/56

Compensation Factor of Ripple Current (RC) vs. Frequency

Frequency

0.1 kHz

0.2 kHz

1 kHz

5 kHz

10 kHz

20 kHz

40 kHz

100 kHz

Coefficient

0.20

0.30

0.55

0.85

0.90

0.95

1

1

Test Method & Performance

Endurance Life Test

Conditions

Performance

Temperature

+125°C

Test Duration

2,000 hours

Voltage

The sum of DC voltage must not exceed the rated voltage of the capacitor

Performance

The following specifications will be satisfied when the capacitor is tested at +20°C:

Capacitance Change

Within 15% of initial value (within 10% at 1,000 hour test)

Equivalent Series Resistance

≤ 1.5x specified limit (ESR measured at 100 kHz +20°C)

Leakage Current

Does not exceed leakage current limit