Electrical Characteristics

MSC8126 Quad Digital Signal Processor Data Sheet, Rev. 13

Freescale Semiconductor

13

2

Electrical Characteristics

This document contains detailed information on power considerations, DC/AC electrical characteristics, and AC timing

specifications. For additional information, see the MSC8126 Reference Manual.

2.1

Maximum Ratings

In calculating timing requirements, adding a maximum value of one specification to a minimum value of another specification

does not yield a reasonable sum. A maximum specification is calculated using a worst case variation of process parameter values

in one direction. The minimum specification is calculated using the worst case for the same parameters in the opposite direction.

Therefore, a “maximum” value for a specification never occurs in the same device with a “minimum” value for another

specification; adding a maximum to a minimum represents a condition that can never exist.

Table 2 describes the maximum electrical ratings for the MSC8126.

CAUTION

This device contains circuitry protecting against damage

due to high static voltage or electrical fields; however,

normal precautions should be taken to avoid exceeding

maximum voltage ratings. Reliability is enhanced if unused

inputs are tied to an appropriate logic voltage level (for

Table 2. Absolute Maximum Ratings

Rating

Symbol

Value

Unit

Core and PLL supply voltage

–0.2 to 1.6

V

I/O supply voltage

–0.2 to 4.0

V

Input voltage

–0.2 to 4.0

V

Maximum operating temperature:

• 400 MHz

• 500 MHz

105

90

°C

°C

Minimum operating temperature

• 400 MHz

• 500 MHz

–40

0

°C

°C

Storage temperature range

–55 to +150

°C

Notes:

1.

Functional operating conditions are given in Table 3.

2.

Absolute maximum ratings are stress ratings only, and functional operation at the maximum is not guaranteed. Stress beyond

the listed limits may affect device reliability or cause permanent damage.

3.