Power

■ PSUs: 2 redundant, load-sharing, hot-swappable AC or -48 VDC

■ Input Voltage: 90 to 240 VAC at 50-60 Hz. -36 to -72 VDC

■ PSU Efficiency: Up to 93% for AC PSUs

■ Power Input Option: 12 VDC

■ Max Power: 550 W

Regulatory

■ EMI:

CE Mark

EN 55022 Class A

EN 55024

EN 61000-3-2

EN 61000-3-3

■ FCC Part 15 Subpart B Class A

■ VCCI Class A

■ Safety:

CB

UL/CUL

■ Environmental:

Temperature: IEC 68-2-14

Vibration: IEC 68-2-36, IEC 68-2-6

Shock: IEC 68-2-29

Drop: ISTA 2A

■ RoHS-6 Compliant

■ Country of Origin: Taiwan (TAA Compliant)

Warranty

Please check www.edge-core.com for the warranty terms in your

country.

For More Information

To find out more about Edgecore Networks Corporation products

and solutions, visit www.edge-core.com.

About Edgecore Networks Corporation

Edgecore Networks Corporation is in the business of providing

innovative network solutions. In the service provider network, in the

data center or in the cloud, Edgecore Networks Corporation delivers

the soſtware and systems that transform the way the world

connects. Edgecore Networks Corporation serves customers and

partners worldwide. Additional information can be found at

www.edge-core.com.

Edgecore Networks Corporation is a subsidiary of Accton

Technology Corporation, the leading network ODM company. The

Edgecore data center switches are developed and manufactured by

Accton.

To purchase Edgecore Networks solutions, please contact your

Edgecore Networks Corporation representatives at +886 3 563 8888

(HQ) or +1 (949)-336-6801 or authorized resellers.

© Copyright 2023 Edgecore Networks Corporation. The information contained herein

is subject to change without notice. This document is for informational purposes only

and does not set forth any warranty, expressed or implied, concerning any

equipment, equipment feature, or service offered by Edgecore Networks Corporation.

Edgecore Networks Corporation shall not be liable for technical or editorial errors or

omissions contained herein.

Ports

■ Switch Ports:

32 x QSFP28 ports. Each port supports 1 x 40/100 GbE or

2 x 50 GbE or 4 x 10/25 GbE per port using splitter cables

■ Management ports on port side:

1 x RJ-45 serial console

1 x RJ-45 100/1000BASE-T management

1 x USB Type A storage

■ Supported Transceivers and Cables:

40GBASE-SR4/LR4

40G-DAC/AOC Cable

100GBASE-SR4/CWDM4/LR4/ER4/ZR4/PSM4-2/DR1/FR1/LR1

100G-DAC/AOC Cable

• Note: More optics and detailed cabling information can be found at

www.edge-core.com.

Key Components

■ Switch Silicon: Broadcom BCM56960 Tomahawk

No PHYs, No Retimers

CPU Modules:

Intel® Atom® C2538 4-Core 2.4 GHz x86 processor

DDR3: SO-DIMM 8 GB x 2

SPI Flash: 8 MB x 2

mSATA SSD: 64 GB MLC

Performance

■ Switching Capacity: 3.2 Tbps full duplex

■ Forwarding Rate: 1.52 Bpps

■ Jumbo frames support up to 9416 Bytes

■ Packet Buffer Size: 16 MB integrated packet buffer

■ Subject to NOS:

MAC Addresses: 8 K min./136 K max.

VLAN IDs: 4 K

IPv4: 8 K min./84 K max. host entries; 16 K LPM entries with

TCAM-only mode

IPv6: 4K /46 K max. host entries; IPv6/64= 8 K TCAM-only mode

Physical and Environmental

■ Dimensions (WxDxH): 43.84 x 51.5 x 4.35 cm (17.3 x 20.3 x 1.7 in)

■ Weight: 10.87 kg (23.96 lb), with two installed PSUs

■ Operating Temperature:

(F2B) 0° C to 45° C (32° F to 113° F)

(B2F) 0° C to 40° C (32° F to 104° F)

■ Storage Temperature: -40°C to 70°C (-40°F to 158°F)

■ Operating Humidity: 5% to 95% non-condensing

Soſtware

■ Switch is loaded with Open Network Install Environment (ONIE)

soſtware installer

■ Compatible with the following NOS options: open source

options, plus commercial NOS offerings.

LEDs

■ QSFP28 Port LEDs: Link Status, Activity, Rate

■ Ethernet Management Port LED: Link Status, Activity

■ Console Port LED: Link Status

■ System LEDs: Diagnostic, Locator, PSU and Fan Status