| Electronic Components Datasheet Search |
|
RA4E2 Datasheet(PDF) 52 Page - Renesas Technology Corp |
|
|
|||||||||||||||||||||||||||||
RA4E2 Datasheet(HTML) 52 Page - Renesas Technology Corp |
|
52 / 91 page ![]() 2.3.10 I3C Timing Table 2.28 IIC timing(1)-1 1. Conditions: Middle drive output is selected in the Port Drive Capability bit in the PmnPFS register for the following pins: SDA0_A, SCL0_A, SDA0_B, SCL0_B, SDA0_C, SCL0_C. 2. The following pins do not require setting: SDA0_D, SCL0_D. 3. Use pins that have a letter appended to their names, for instance “_A” or “_B”, to indicate group membership. For the IIC interface, the AC portion of the electrical characteristics is measured for each group. Parameter Symbol Min Max Unit IIC (Standard mode, SMBus) BFCTL.FMPE = 0 SCL input cycle time tSCL 10(18) × tI3Ccyc + 1300 — ns SCL input high pulse width tSCLH 5(9) × tI3Ccyc + 300 — ns SCL input low pulse width tSCLL 5(9) × tI3Ccyc + 300 — ns SCL, SDA rise time tSr — 1000 ns SCL, SDA fall time tSf — 300 ns SCL, SDA input spike pulse removal time tSP 0 1(4) × tI3Ccyc ns SDA input bus free time when wakeup function is disabled tBUF 5(9) × tI3Ccyc + 300 — ns SDA input bus free time when wakeup function is enabled tBUF 5(9) × tI3Ccyc + 4 × tTcyc + 300 — ns START condition input hold time when wakeup function is disabled tSTAH tI3Ccyc + 300 — ns START condition input hold time when wakeup function is enabled tSTAH 1(5) × tI3Ccyc + tTcyc + 300 — ns Repeated START condition input setup time tSTAS 1000 — ns STOP condition input setup time tSTOS 1000 — ns Data input setup time tSDAS tI3Ccyc + 50 — ns Data input hold time tSDAH 0 — ns SCL, SDA capacitive load Cb*1 — 400 pF Note: tI3Ccyc: I3C internal reference clock (I3Cφ) cycle, tTcyc: I3CCLK cycle. Note: Values in parentheses apply when INCTL.DNFS[3:0] is set to 0x3 while the digital filter is enabled with INCTL.DNFE set to 1. Note: Must use pins that have a letter appended to their name, for instance “_A”, “_B”, to indicate group membership. For the IIC interface, the AC portion of the electrical characteristics is measured for each group. Note 1. Cb indicates the total capacity of the bus line. RA4E2 Datasheet 2. Electrical Characteristics R01DS0413EJ0150 Rev.1.50 May 29, 2026 Page 52 of 91 |
|
Link URL |
| Does ALLDATASHEET help your business so far? [ DONATE ] |
About Alldatasheet | Advertisement | Contact us | Privacy Policy | Link to Datasheet | Link Exchange | Manufacturer List All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |