Electronic Components Datasheet Search
  New Zealand  ▼
ALLDATASHEET.CO.NZ

X  

CS-LDTC17 Datasheet(PDF) 2 Page - Wavelength Electronics, Inc.

Part # CS-LDTC17
Description  Scalable Modular Tomography Sensor for High-Speed Gas-Turbine Exhaust Imaging
PDF  5 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
Manufacturer  WAVELENGTH [Wavelength Electronics, Inc.]
Direct Link  https://www.teamwavelength.com/
Logo WAVELENGTH - Wavelength Electronics, Inc.

CS-LDTC17 Datasheet(HTML) 2 Page - Wavelength Electronics, Inc.

  CS-LDTC17 Datasheet HTML 1Page - Wavelength Electronics, Inc. CS-LDTC17 Datasheet HTML 2Page - Wavelength Electronics, Inc. CS-LDTC17 Datasheet HTML 3Page - Wavelength Electronics, Inc. CS-LDTC17 Datasheet HTML 4Page - Wavelength Electronics, Inc. CS-LDTC17 Datasheet HTML 5Page - Wavelength Electronics, Inc.  
Zoom Inzoom in Zoom Outzoom out
 2 / 5 page
background image
Case Study CS-LDTC17 Rev. A
Page 2
© 2026 • Sales & Technical Support: (406) 587-4910 • email: sales@teamWavelength.com • web: www.teamWavelength.com
Historically, this meant that a CST system designed for one
engine was entirely incompatible with another, requiring
a complete and expensive mechanical redesign for every
new test campaign. Existing systems are also plagued by a
trade-off between spatial and temporal resolution; systems
with enough laser beams for clear imaging are often too
slow to capture dynamic pulsations (limited to 1–2 fps),
while faster systems lack the beam density to resolve small-
scale flow features.
METHOD
Researchers from the Universities of Edinburgh, Sheffield,
and Strathclyde, UK, have developed a 128-beam CST
sensor arranged into four equi-angular projections (0°, 45°,
90°, and 135°), with 32 parallel beams per projection. Every
individual laser beam is managed by a self-contained,
compact emitter-receiver module shown in
Figure 2. By
standardizing these units, the sensor can be scaled to
any engine size simply by rearranging the modules on
a different octagonal frame. Each emitter unit consists
of a miniaturized fiber-coupled C-lens collimator, a right-
angle prism, and a spring-loaded mirror mount allowing for
precision alignment. The receiver units utilize a convex lens
to focus transmitted light onto a PIN photodiode connected
to a custom Trans-Impedance Amplifier (TIA) circuit with a
-3 dB bandwidth of 3.16 MHz.1
Figure 2. Design of a laser emitter-receiver unit for the
modularized CST sensor.1
To validate the modularized CST sensor, researchers
set out to reconstruct water vapor concentration and
temperature fields in an exhaust plume of a commercial gas
turbine Auxiliary Power Unit (APU). Due to the modular and
scalable nature of the design, researchers could assemble
the 128-beam CST sensor for a specific APU for testing and
validation (
Figure 3). Before field-deploying their system,
experiments in the lab could confirm performance on a
smaller scale in post-combustion flow fields with varying
profiles and dynamics.
Figure 3. Assembly of the 128-beam modularized CST
sensor for APU exhaust imaging.1
The setup for the lab-scale validation is shown in
Figure 4
with the 128-beam design separated into four emitter
and receiver modules, two lasers with splitters and laser
drivers and temperature controllers, a signal generator for
frequency scanning and modulation, a data acquisition
(DAQ) system, and a workstation for data analysis.
Figure 4. CST system setup for lab-scale validation.1
The system targets two water vapor absorption transitions
at 1391 nm (7185.6 cm-1) and 1343 nm (7444.4 cm-1) to
perform ratio thermometry, which provides sensitivity across
a wide range of 300 to 1800 K, capturing the temperature
range of the exhaust plume.1 Based on the Beer-Lambert
Law, researchers can use laser absorption spectroscopy to
determine the water concentration. To ensure stable laser
operation, Wavelength Electronics LDTC2/2E controllers
were integrated to manage the current and temperature of
the Distributed Feedback (DFB) laser diodes. This setup
enabled Wavelength Modulation Spectroscopy (WMS),
with injection currents scanned at 1 kHz and modulated
at 188 kHz and 250 kHz for high signal-to-noise ratio
detection. A high-speed 16-hub data acquisition (DAQ)
system digitized the signals, facilitating the 250 fps imaging
rate.



Html Pages

1 2 3 4 5


Datasheet Download

Go To PDF Page


Link URL



Does ALLDATASHEET help your business so far?  [ DONATE ] 

About Alldatasheet   |   Advertisement   |   Contact us   |   Privacy Policy   |   Link to Datasheet    |   Link Exchange   |   Manufacturer List
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com