HD404369F datasheet(18/117 Pages) RENESAS

Part #	HD404369F

Description	microcomputer has an A/D converter

PDF	117 Pages

Scroll/Zoom	100%

Manufacturer	RENESAS [Renesas Technology Corp]

Direct Link	http://www.renesas.com

Logo

18 / 117 page

HD404369 Series

An interrupt request occurs when the IF is set to 1 and the IM is set to 0. If the IE is 1 at that point, the

interrupt is processed. A priority programmable logic array (PLA) generates the vector address assigned to

that interrupt source.

The interrupt processing sequence is shown in figure 9 and an interrupt processing flowchart is shown in

figure 10. After an interrupt is acknowledged, the previous instruction is completed in the first cycle. The

IE is reset in the second cycle, the carry, status, and program counter values are pushed onto the stack

during the second and third cycles, and the program jumps to the vector address to execute the instruction

in the third cycle.

Program the JMPL instruction at each vector address, to branch the program to the start address of the

interrupt program, and reset the IF by a software instruction within the interrupt program.

HD404369F Datasheet(PDF) 18 Page - Renesas Technology Corp