HD6432351 datasheet(539/1025 Pages) RENESAS

539 / 1025 page

Section 11 Programmable Pulse Generator (PPG)

Rev. 3.00 Sep 15, 2006 page 505 of 988

REJ09B0330-0300

Section 11 Programmable Pulse Generator (PPG)

11.1

Overview

The H8S/2350 Group has a built-in programmable pulse generator (PPG) that provides pulse

outputs by using the 16-bit timer-pulse unit (TPU) as a time base. The PPG pulse outputs are

divided into 4-bit groups (group 3 to group 0) that can operate both simultaneously and

independently.

11.1.1

Features

PPG features are listed below.

• 16-bit output data

 Maximum 16-bit data can be output, and output can be enabled on a bit-by-bit basis

• Four output groups

 Output trigger signals can be selected in 4-bit groups to provide up to four different 4-bit

outputs

• Selectable output trigger signals

 Output trigger signals can be selected for each group from the compare match signals of

four TPU channels

• Non-overlap mode

 A non-overlap margin can be provided between pulse outputs

• Can operate together with the data transfer controller (DTC) and DMA controller (DMAC)

 The compare match signals selected as output trigger signals can activate the DTC or

DMAC for sequential output of data without CPU intervention

• Settable inverted output

 Inverted data can be output for each group

• Module stop mode can be set

 As the initial setting, PPG operation is halted. Register access is enabled by exiting module

stop mode

HD6432351 Datasheet(PDF) 539 Page - Renesas Technology Corp