NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com

03-07

Ultra-Miniature SMT Slides

Series SS3

General Specifications

Electrical Capacity (Resistive Load)

Logic Level (code 4):

0.4VA maximum @ 28V AC/DC maximum

(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)

0.1A @ 12V DC

Note: Find additional explanation of operating range in Supplement section.

Other Ratings

Contact Resistance:

50 milliohms maximum

Insulation Resistance:

100 megohms minimum @ 500V DC

Dielectric Strength:

500V AC minimum for 1 minute minimum

Mechanical Life:

10,000 operations minimum

Electrical Life:

10,000 operations minimum

Contact Timing:

SS312S ~ Shorting (make-before-break); SS314M ~ Nonshorting (break-before-make)

Total Travel:

.079” (2.0mm)

Materials & Finishes

Actuator:

Polyphenylene sulfide

Housing:

Phosphor bronze with tin plating (UL94V-0)

Base:

Polyphenylene sulfide (UL94V-0)

Movable Contactor:

Phosphor bronze with gold plating over silver plating (code 4)

Terminals:

Phosphor bronze with gold plating

Environmental Data

Operating Temp Range:

–25°C through +85°C (–13°F through +185°F)

Humidity:

90 ~ 95% humidity for 240 hours @ 40°C (104°F)

Vibration:

10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in

1 minute; 3 right angled directions for 2 hours

Shock:

Installation

Soldering:

Reflow Soldering Recommended. See Profile A in Supplement section.

Manual Soldering: See Profile A in Supplement section.

Cleaning:

These devices are not process sealed.

Standards & Certifications

Flammability Standards:

UL 94V-0 rated housing & base

UL Recognition

The SS3 Series slides have not been tested for UL recognition or CSA certification.

or CSA Certification:

These switches are designed for use in a low-voltage, low-current, logic-level circuit.

When used as intended in a logic-level circuit, the results do not produce hazardous energy.