MCP413X datasheet(35/88 Pages) MICROCHIP

Part #	MCP413X

Description	7/8-Bit Single/Dual SPI Digital POT with Volatile Memory

PDF	88 Pages

Scroll/Zoom	100%

Manufacturer	MICROCHIP [Microchip Technology]

Direct Link	http://www.microchip.com

Logo

35 / 88 page

DS22060B-page 35

MCP413X/415X/423X/425X

4.2.1.2

Terminal Control (TCON) Register

This register contains 8 control bits. Four bits are for

Wiper 0, and four bits are for Wiper 1. Register 4-2

describes each bit of the TCON register.

The state of each resistor network terminal connection

is individually controlled. That is, each terminal

connection (A, B and W) can be individually connected/

disconnected from the resistor network. This allows the

system to minimize the currents through the digital

potentiometer.

The value that is written to this register will appear on

the resistor network terminals when the serial

command has completed.

On a POR/BOR this register is loaded with 1FFh

(9-bits), for all terminals connected. The Host

Controller needs to detect the POR/BOR event and

then update the Volatile TCON register value.

MCP413X Datasheet(PDF) 35 Page - Microchip Technology