USB Host

USB

Connector

Redriver

USB Host

Device

Connector

3m USB

3.0 Cable

Redriver

20"

Main PCB

Device PCB

1"-6"

Main PCB

20"

SN65LVPE502CP

www.ti.com

SLLSE79A

– MARCH 2011 – REVISED SEPTEMBER 2011

Dual Channel USB3.0 Redriver/Equalizer

Check for Samples: SN65LVPE502CP

1

FEATURES

•

High Protection Against ESD Transient

– HBM: 5,000 V

•

Single Lane USB 3.0 Equalizer/Redriver

– CDM: 1,500 V

•

Selectable Equalization, De-Emphasis and

Output Swing Control

– MM: 200 V

•

Integrated Termination

APPLICATIONS

•

Hot-Plug Capable

•

Notebooks, Desktops, Docking Stations,

•

Low Active Power (U0 state)

Active Cable, Backplane and Active Cable

•

USB 3.0 Low Power Support

DESCRIPTION

– 7 mW (TYP) When no Connection Detected

The SN65LVPE502CP is a dual channel, single lane

– 70 mW (TYP) When Link in U2/U3 Mode

USB 3.0 redriver and signal conditioner supporting

data rates of 5.0Gbps. The device complies with USB

•

Excellent Jitter and Loss Compensation

3.0 spec revision 1.0, supporting electrical idle

Capability:

condition and low frequency periodic signals (LFPS)

– >40" of Total 4 mil Stripline on FR4

for USB 3.0 power management modes.

•

Small Foot Print

– 24 Pin (4mm x 4mm) QFN

SPACER

Package

Figure 1. Typical Application

1

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

PRODUCTION DATA information is current as of publication date.

Copyright

© 2011, Texas Instruments Incorporated

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.