L99PM62XP datasheet(30/98 Pages) STMICROELECTRONICS

30 / 98 page

Description

L99PM62XP

30/98

Doc ID 16363 Rev 3

Figure 17.

LIN master node configuration using LIN_PU (optional)

LIN_PU high-side driver characteristics:

●

Activated by default and can be turned off by SPI command (CR4).

●

Remains active in standby modes.

●

Switch off only in case of over temperature (TSD2 = thermal shutdown #2).

●

No over current protection.

●

Typical RDSon, 10 Ω.

2.9

High speed CAN bus transceiver

General requirements

●

Speed communication up to 1 Mbit/s.

●

ISO 11898-2 and ISO 11898-5 compliant

●

SAE J2284 compliant

●

Function range from +40 V to -27 V DC at CAN pins.

●

GND disconnection fail safe at module level.

●

GND shift operation at system level.

●

Micro controller Interface with CMOS compatible I/O pins.

●

ESD and transient immunity according to ISO7637 and EN / IEC61000-4-2

●

Matched output slopes and propagation delay

●

Split output pin for stabilizing the recessive bus level

●

Receive-only mode available

In order to further reduce the current consumption in standby mode, the integrated CAN bus

interface offers an ultra low current consumption.

L99PM62XP Datasheet(PDF) 30 Page - STMicroelectronics

L99PM62XP Datasheet(HTML) 30 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98

Datasheet Download

Link URL