KTPFPGMEVMEUG datasheet(36/48 Pages) FREESCALE

Part #	KTPFPGMEVMEUG

Description	KITPFPGMEVME Programmer for PF Series Devices

PDF	48 Pages

Scroll/Zoom	100%

Manufacturer	FREESCALE [Freescale Semiconductor, Inc]

Direct Link	http://www.freescale.com

Logo

36 / 48 page

KTPFPGMEVMEUG, Rev. 2.0

Freescale Semiconductor

Graphical User Interface Description

LOG:INT:<Int operator>

Shows the status of the corresponding interrupt bit.

Interrupt operators are as follows:

• 110_DEGREES

• 120_DEGREES

• 125_DEGREES

• 130_DEGREES

• SW1A_OVERCURRENT

• SW1C_OVERCURRENT

• SW2_OVERCURRENT

• SW3A_OVERCURRENT

• SW3B_OVERCURRENT

• SW4_OVERCURRENT

• SWBST_OVERCURRENT

• VGEN1_OVERCURRENT

• VGEN2_OVERCURRENT

• VGEN3_OVERCURRENT

• VGEN4_OVERCURRENT

• VGEN5_OVERCURRENT

• VGEN6_OVERCURRENT

All characters (except for the "Float" subcommand) have to be entered in uppercase.

The register and data values should be entered as hexadecimal numbers, for example: 0x20 is entered as 20.

The output voltage operating range is set during OTP programming and cannot be changed under normal

PMIC control.

Table 2. Command List(1)

Command

Description

KTPFPGMEVMEUG Datasheet(PDF) 36 Page - Freescale Semiconductor, Inc