DS91C176, DS91D176

www.ti.com

SNLS146L – MARCH 2006 – REVISED APRIL 2013

Absolute Maximum Ratings

(1) (2)

−0.3V to +4V

Control Input Voltages

Driver Input Voltage

Driver Output Voltages

−1.8V to +4.1V

Receiver Input Voltages

−1.8V to +4.1V

Receiver Output Voltage

Maximum Package Power Dissipation at +25°C

SOIC Package

833 mW

Derate SOIC Package

6.67 mW/°C above +25°C

Thermal Resistance (4-Layer, 2 oz. Cu, JEDEC)

150°C/W

63°C/W

Maximum Junction Temperature

150°C

Storage Temperature Range

−65°C to +150°C

Lead Temperature

(Soldering, 4 seconds)

260°C

ESD Ratings:

(HBM 1.5k

Ω, 100pF)

≥ 8 kV

(EIAJ 0

Ω, 200pF)

≥ 250 V

(CDM 0

Ω, 0pF)

≥ 1000 V

(1)

“Absolute Maximum Ratings” are those beyond which the safety of the device cannot be verified. They are not meant to imply that the

device should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.

(2)

If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications.

Recommended Operating Conditions

Min

Typ

Max

Units

3.0

3.3

3.6

V

Voltage at Any Bus Terminal (Separate or Common-Mode)

−1.4

+3.8

V

2.4

V

2.0

V

0

0.8

V

−40

+25

+85

°C

Electrical Characteristics

Over recommended operating supply and temperature ranges unless otherwise specified.

(1) (2) (3) (4)

Parameter

Test Conditions

Min

Typ

Max

Units

M-LVDS Driver

Differential output voltage magnitude

480

650

mV

See Figure 4 and Figure 6

Change in differential output voltage magnitude

−50

0

+50

mV

between logic states

Steady-state common-mode output voltage

0.3

1.8

2.1

V

See Figure 4 and Figure 5

|

Change in steady-state common-mode output

0

+50

mV

voltage between logic states

Peak-to-peak common-mode output voltage

135

mV

Maximum steady-state open-circuit output voltage

See Figure 7

0

2.4

V

Maximum steady-state open-circuit output voltage

0

2.4

V

(1)

All currents into device pins are positive; all currents out of device pins are negative. All voltages are referenced to device ground unless

otherwise specified.

(2)

(3)

The algebraic convention, in which the least positive (most negative) limit is designated as minimum, is used in this datasheet.

(4)

Copyright © 2006–2013, Texas Instruments Incorporated

Submit Documentation Feedback

3

Product Folder Links: DS91C176 DS91D176