IRLR2905ZPBF datasheet(11/11 Pages) IRF

11 / 11 page

IRLR/U2905ZPbF

www.irf.com

Data and specifications subject to change without notice.

This product has been designed for the Industrial market.

Qualification Standards can be found on IR’s Web site.

IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105

TAC Fax: (310) 252-7903

Visit us at www.irf.com for sales contact information.10/2010

Repetitive rating; pulse width limited by

max. junction temperature. (See fig. 11).

Limited by TJmax, starting TJ = 25°C, L = 0.089mH

RG = 25

Ω, IAS = 36A, VGS =10V. Part not

recommended for use above this value.

Pulse width ≤ 1.0ms; duty cycle ≤ 2%.

Notes:

Coss eff. is a fixed capacitance that gives the same charging time

as Coss while VDS is rising from 0 to 80% VDSS .

Limited by TJmax , see Fig.12a, 12b, 15, 16 for typical repetitive

avalanche performance.

This value determined from sample failure population. 100%

tested to this value in production.

When mounted on 1" square PCB (FR-4 or G-10 Material) .

For recommended footprint and soldering techniques refer to

application note #AN-994

Rθ is measured at TJ approximately 90°C

D-Pak (TO-252AA) Tape & Reel Information

Dimensions are shown in millimeters (inches)

16.3 ( .641 )

15.7 ( .619 )

8.1 ( .318 )

7.9 ( .312 )

12.1 ( .476 )

11.9 ( .469 )

FEED DIRECTION

16.3 ( .641 )

15.7 ( .619 )

TRR

TRL

NOTES :

1. CONTROLLING DIMENSION : MILLIMETER.

2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ).

3. OUTLINE CONFORMS TO EIA-481 & EIA-541.

NOTES :

1. OUTLINE CONFORMS TO EIA-481.

16 mm

13 INCH

IRLR2905ZPBF Datasheet(PDF) 11 Page - International Rectifier

IRLR2905ZPBF Datasheet(HTML) 11 Page - International Rectifier

Html Pages

1 2 3 4 5 6 7 8 9 10 11

Datasheet Download

Link URL