PIC10LF322T-EMCSQTP datasheet(180/210 Pages) MICROCHIP

180 / 210 page

PIC10(L)F320/322

DS41585A-page 180

Preliminary

 2011 Microchip Technology Inc.

24.8

AC Characteristics: PIC10(L)F320/322-I/E

FIGURE 24-5:

CLOCK TIMING

TABLE 24-1:

CLOCK OSCILLATOR TIMING REQUIREMENTS

TABLE 24-2:

OSCILLATOR PARAMETERS

Standard Operating Conditions (unless otherwise stated)

Operating temperature

-40°C

 TA  +125°C

Param

No.

Sym.

Characteristic

Min.

Typ†

Max.

Units

Conditions

OS01

FOSC

External CLKIN Frequency(1)

—

MHz

EC mode

OS02

TOSC

External CLKIN Period(1)

31.25

—



EC Oscillator mode

OS03

TCY

Instruction Cycle Time(1)

200

TCY

TCY = 4/FOSC

These parameters are characterized but not tested.

†

Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not

tested.

Note 1:

Instruction cycle period (TCY) equals four times the input oscillator time base period. All specified values are based on

characterization data for that particular oscillator type under standard operating conditions with the device executing code.

Exceeding these specified limits may result in an unstable oscillator operation and/or higher than expected current con-

sumption. All devices are tested to operate at “min” values with an external clock applied to CLKIN pin. When an external

clock input is used, the “max” cycle time limit is “DC” (no clock) for all devices.

Standard Operating Conditions (unless otherwise stated)

Operating Temperature

-40°C

TA +125°C

Param

No.

Sym.

Characteristic

Freq.

Tolerance

Min.

Typ†

Max.

Units

Conditions

OS08

HFOSC

Internal Calibrated HFINTOSC

Frequency(1)

±2%

±3%

—

16.0

—

MHz

0°C

 TA  +60°C, VDD 2.5V

60°C

TA 85°C, VDD 2.5V

±5%

—

16.0

—

MHz

-40°C

 TA  +125°C

OS09

LFOSC

Internal LFINTOSC Frequency

—

kHz

-40°C

 TA  +125°C

OS10*

TIOSC ST HFINTOSC

Wake-up from Sleep Start-up Time

——

s

These parameters are characterized but not tested.

†

Data in “Typ” column is at 3.0V, 25°C unless otherwise stated. These parameters are for design guidance only and are not

tested.

Note 1:

To ensure these oscillator frequency tolerances, VDD and VSS must be capacitively decoupled as close to the device as

possible. 0.1

F and 0.01 F values in parallel are recommended.

CLKIN

CLKR

OS02

OS03

(CLKROE = 1)

PIC10LF322T-EMCSQTP Datasheet(PDF) 180 Page - Microchip Technology

PIC10LF322T-EMCSQTP Datasheet(HTML) 180 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL