4D SYSTEMS

PICASO OGM Module

© 2013 4D SYSTEMS

Page 21 of 22

www.4dsystems.com.au

17. Specifications and Ratings

ABSOLUTE MAXIMUM RATINGS

Operating ambient temperature ................................................................................................... -15°C to +65°C

Storage temperature .......................................................................................................................... -30°C +70°C

Voltage on any digital input pin with respect to GND ....................................................................... -0.3V to 6.0V

Voltage on RAW+3.3V with respect to GND ...................................................................................... -0.3V to 3.6V

Voltage on RAW+VCC with respect to GND ...................................................................................... -0.3V to 5.5V

NOTE: Stresses above those listed here may cause permanent damage to the device. This is a stress rating only

and functional operation of the device at those or any other conditions above those indicated in the

recommended operation listings of this specification is not implied. Exposure to maximum rating conditions

for extended periods may affect device reliability.

RECOMMENDED OPERATING CONDITIONS

Parameter

Conditions

Min

Typ

Max

Units

Supply Voltage

(RAW+3.3V)

Stable Regulated external supply

required

3.3

3.3

3.6

V

Backlight Supply

(RAW+VCC)

Stable Regulated external supply

required (3.3V results in dim backlight)

3.3

5.0

5.5

V

Operating Temperature

-10

--

+60

°C

Input Low Voltage (VIL)

3.3V, all pins

0

--

0.2

V

Input High Voltage (VIH)

3.3V, non 5V tolerant pins

0.8

--

3.3

V

Input High Voltage (VIH)

All GPIO pins, RX0 and TX0 pins

0.8

--

5.5

V

Reset Pulse

External Open Collector

2.0

--

--

µs

Operational Delay

Power-Up or External Reset

500

--

3000

ms

GLOBAL CHARACTERISTICS BASED ON OPERATING CONDITIONS

Parameter

Conditions

Min

Typ

Max

Units

Supply Current (ICC)

3.3V, heavily depends on screen usage

conditions, sleep mode

--

TBD

--

mA

Output Low Voltage

(VOL)

3.3V, IOL = 3.4mA

--

--

0.4

V

Output High Voltage

(VOH)

3.3V, IOL = -2.0mA

2.4

--

--

V

Capacitive Loading

All pins

--

--

50

pF

Flash Memory

Endurance

PICASO PmmC Programming

--

10000

--

E/W

ORDERING INFORMATION

Order Code: PICASO-OGM

Packaging: Bulk Packaging