M95512-R datasheet(30/50 Pages) STMICROELECTRONICS

Part #	M95512-R

Description	512-Kbit serial SPI bus EEPROM

PDF	50 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

30 / 50 page

Power-up and delivery state

M95512-W M95512-R M95512-DR M95512-DF

30/50

DocID11124 Rev 21

Power-up and delivery state

7.1

Power-up state

After power-up, the device is in the following state:

•

Standby power mode,

•

deselected (after power-up, a falling edge is required on Chip Select (S) before any

instructions can be started),

•

not in the Hold condition,

•

the Write Enable Latch (WEL) is reset to 0,

•

Write In Progress (WIP) is reset to 0.

The SRWD, BP1 and BP0 bits of the Status Register are unchanged from the previous

power-down (they are non-volatile bits).

7.2

Initial delivery state

The device is delivered with the memory array bits and identification page bits set to all 1s

(each byte = FFh). The Status Register Write Disable (SRWD) and Block Protect (BP1 and

BP0) bits are initialized to 0.

M95512-R Datasheet(PDF) 30 Page - STMicroelectronics