AN3213 datasheet(11/64 Pages) STMICROELECTRONICS

Part #	AN3213

Description	ST7570 S-FSK power line networking system-on-chip

PDF	64 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

11 / 64 page

AN3213

Safety recommendations

Doc ID 17429 Rev 1

11/64

Safety recommendations

The board must be used by expert technicians only. Due to the high voltage (85-265 VAC)

present on the non-isolated parts, special care must be taken in order to avoid electrical

risks regarding user safety.

There is no protection against accidental human contact with high voltages.

After disconnecting the board from the mains, no live parts must be touched immediately

because of the energized capacitors.

It is mandatory to use a mains insulation transformer to perform any tests on the high

voltage sections, using test instruments such as, spectrum analyzers or oscilloscopes.

Do not connect any probe to high voltage sections if the board is not isolated from the mains

supply, in order to avoid damaging instruments and demo tools.

Warning:

STMicroelectronics assumes no responsibility for the

consequences arising from any improper use of this

development tool.

AN3213 Datasheet(PDF) 11 Page - STMicroelectronics