UM0969 datasheet(9/46 Pages) STMICROELECTRONICS

Part #	UM0969

Description	3-phase motor control demonstration board featuring IGBT intelligent power module STGIPS10K60A

PDF	46 Pages

Scroll/Zoom	100%

Manufacturer	STMICROELECTRONICS [STMicroelectronics]

Direct Link	http://www.st.com

Logo

9 / 46 page

UM0969

Board description

Doc ID 17665 Rev 2

9/46

Board description

2.1

System architecture

A generic motor control system can be basically schematized as the combination of three

main blocks (see Figure 2):

●

Control block: the main task of this block is to accept user commands and board\motor

configuration parameters. The control block provides all digital signals to implement the

right motor driving strategy. The STM3210B-EVAL, ST demonstration board, based on

an STM32 microcontroller, can be connected to the STEVAL-IHM027V1 thanks to the

onboard motor control connector

●

Power block: this is based on three-phase inverter topology. The heart of the power

block is the STGIPS10K60A integrated intelligent power module which contains all the

necessary active components. Please refer to the STGIPS10K60A datasheet (see

References 1) for more information

●

Power supply block: able to work from 90 VAC to 220 VAC or from 125 VDC to 350

VDC. Please refer to Section 3: Hardware setting of the STEVAL-IHM027V1, to

properly set the jumpers according to the required application

Figure 2.

Motor control system architecture

The STEVAL-IHM027V1 includes the power supply and the power block.

UM0969 Datasheet(PDF) 9 Page - STMicroelectronics