PowerVerter APS INT 3600W 36VDC 230V

Inverter/Charger with Auto Transfer Switching,

Hardwired, AVR

MODEL NUMBER: APSINT3636VR

Description

Tripp Lite's APSINT3636VR DC-to-AC inverter with automatic line-to-battery transfer and integrated charging

system serves as an extended run UPS, a standalone power source or an automotive inverter. Supplies up to

3600 watts of continuous 230V AC power from any 36V battery or automotive DC source. When hardwire AC

input is energized, commercial power passes through to connected equipment and the battery set is recharged

via 3-stage, selectable wet/dry cell battery charger (30-amp high/7.5-amp low). In UPS mode, the APS system

responds to blackouts and severe voltage fluctuations with a near instantaneous automatic transfer to

battery-derived AC output. Includes a set of high current DC input terminals for simple installation (user supplies

batteries and cabling - see owner's manual for recommendations). Passes sine wave utility or generator power

during battery charging and UPS line power operation, plus efficient PWM sine wave AC output in inverter and

UPS backup modes. Built-in Automatic Voltage Regulation (AVR) corrects line power AC brownouts and

overvoltages without using battery power during battery charging and UPS standby modes. Reliable large

transformer design, with frequency control powers resistive electronic loads or large inductive motors,

compressors and other items with high current needs on startup. Included APSRM4 wired remote power switch

with full status LEDs provides remote power inverter on/off switching and continuous status information

(APSRM4 included). Supports an unlimited amount of runtime with any number of user-supplied batteries

connected. Highly adaptable to a variety of applications and site conditions with adjustable charger settings for

wet/gel battery types and selectable line to battery power transfer voltages.

Features

Supports 230V AC output from a 230V AC line power source or 12V DC battery source

20 millisecond automatic transfer between line and battery power supports UPS protection during blackouts

and voltage fluctuations for equipment compatible with a one cycle transfer time

Double Boost inverter output supports momentary startup loads up to 200% of the continuous rating for up to

10 seconds (see specification chart)

Highlights

36V DC or 230V AC input; 230V,

50 Hz output (hardwired)

3600 watts continuous, 5400

watts OverPower and 7200 watts

DoubleBoost inverter output (see

specifications)

3-stage, selectable wet/dry cell

battery charger (30-amp

high/7.5-amp low)

Auto Transfer Switching option

for battery backup / UPS

operation - includes wired

APSRM4 remote control switch

Automatic Voltage Regulation

corrects brownouts and

overvoltages without using

battery power

Applications

Versatile inverter/charger system

with auto-transfer switching

serves as an automotive inverter

for RVs, over-the-road trucking,

conversion vans and fleet service

vehicles; a standalone alternative

power source for off-grid,

alternative energy or export

applications and as an

uninterruptible power supply

(UPS) for items compatible with a

20 millisecond transfer time.

NOTE: For sump pump

applications, Tripp Lite

recommends its "UT" Utility Truck

Inverter/Chargers.

Package Includes

APSINT3636VR Inverter/Charger

Instruction manual with warranty

information

Wired Remote Switch with full

LED status indicators (model

APSRM4)

1 / 4