Carrier tape mechanical dimensions

TN1206

12/16

DocID027388 Rev 3

Table 5. Carrier tape constant dimensions (width > 24 mm)

Tape

width

D0

D1 min

E1

P0

P2

S1

T max. T1 max.

Unit

32 mm

1.5+0.1-

0.0

2.0

1.75±0.1

4.0±0.1

2.0±0.1

50

0.6

0.6

0.1

mm

44 mm

2.0±0.15

1. The maximum radius the tape with or without components can bend without damage is specified in Section 6: Bending

radius requirements).

Table 6. Carrier tape variable dimensions (width > 24 mm)

Tape

width

B1

F

P1

S0

T2 max.

W max.

A0, B0, K0

Unit

32 mm

23.0

14.2±0.10

24.0±0.1

28.4±0.1

12.0

32.0±0.3

mm

44 mm

35.0

20.2±0.15

32.0±0.1

40.4±0.1

16.0

44.0±0.3

1. The cavity defined by A0, B0 and K0 surrounds the component with sufficient clearance so that:

- The component does not protrude above the top surface of the carrier tape.

- The component can be removed vertically from the cavity without mechanical restriction, after the top cover tape has been

removed.

- Rotation of the component is limited to 10° maximum for 44 mm tapes.

- Lateral movements of the component are restricted to 1.0 mm maximum.