CF745 datasheet(72/217 Pages) MICROCHIP

72 / 217 page

PIC16C5X

PIC16C54/55/56/57

DS30453B-page 72

Preliminary

11.4

DC Characteristics: PIC16C54/55/56/57-RC, XT, 10, HS, LP (Commercial)

PIC16C54/55/56/57-RCI, XTI, 10I, HSI, LPI (Industrial)

DC Characteristics

All Pins Except

Power Supply Pins

Standard Operating Conditions (unless otherwise speciﬁed)

Operating Temperature

°C ≤ TA ≤ +70°C (commercial)

–40

°C ≤ TA ≤ +85°C (industrial)

Operating Voltage VDD range is described in Section 11.1, Section 11.2 and

Section 11.3.

Characteristic

Sym

Min

Typ(1)

Max

Units

Conditions

Input Low Voltage

I/O ports

MCLR (Schmitt Trigger)

T0CKI (Schmitt Trigger)

OSC1 (Schmitt Trigger)

VIL

VSS

—

0.2 VDD

0.15 VDD

0.3 VDD

Pin at hi-impedance

PIC16C5X-RC only(4)

PIC16C5X-XT, 10, HS, LP

Input High Voltage

I/O ports

MCLR (Schmitt Trigger)

T0CKI (Schmitt Trigger)

OSC1 (Schmitt Trigger)

VIH

0.45 VDD

2.0

0.36 VDD

0.85 VDD

0.7 VDD

—

VDD

For all VDD(5)

4.0V < VDD

≤ 5.5V(5)

VDD > 5.5V

PIC16C5X-RC only(4)

PIC16C5X-XT, 10, HS, LP

Hysteresis of Schmitt

Trigger inputs

VHYS

0.15VDD*—

—

Input Leakage Current(2,3)

I/O ports

MCLR

T0CKI

OSC1

IIL

–1

–5

–3

0.5

µA

For VDD

≤ 5.5V

VSS

≤ VPIN ≤ VDD,

Pin at hi-impedance

VPIN = VSS + 0.25V

VPIN = VDD

VSS

≤ VPIN ≤ VDD

VSS

≤ VPIN ≤ VDD,

PIC16C5X-XT, 10, HS, LP

Output Low Voltage

I/O ports

OSC2/CLKOUT

VOL

—

0.6

IOL = 8.7 mA, VDD = 4.5V

IOL = 1.6 mA, VDD = 4.5V,

PIC16C5X-RC

Output High Voltage

I/O ports(3)

OSC2/CLKOUT

VOH

VDD – 0.7

—

IOH = –5.4 mA, VDD = 4.5V

IOH = –1.0 mA, VDD = 4.5V,

PIC16C5X-RC

* These parameters are characterized but not tested.

Note 1: Data in the Typical (“Typ”) column is based on characterization results at 25

°C. This data is for design guidance

only and is not tested.

2: The leakage current on the MCLR/VPP pin is strongly dependent on the applied voltage level. The speciﬁed

levels represent normal operating conditions. Higher leakage current may be measured at different input

voltage.

3: Negative current is deﬁned as coming out of the pin.

4: For PIC16C5X-RC devices, the OSC1/CLKIN pin is a Schmitt Trigger input. It is not recommended that the

PIC16C5X be driven with external clock in RC mode.

5: The user may use the better of the two speciﬁcations.

CF745 Datasheet(PDF) 72 Page - Microchip Technology

CF745 Datasheet(HTML) 72 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL