UT8SF2M32MCPC datasheet(27/27 Pages) AEROFLEX

27 / 27 page

36-00-01-006

Ver.

1.9.4

Aeroflex Microelectronics Solutions - HiRel

10/2/2014 Page 11: Added Operational Environment table.

Page 12: Added IIN paramter for EDACEN, TDI, and TMS pins. DC ELECTRICAL

CHARACTERISTICS table

Page 16: Corrected min tCYC in Shutdown and Sleep Mode Characteristics table

Page 23 and 24: Updated SMD and Ordering Info sections.

As noted

MJL

3/18/2015

Ver. 1.8.0

Page 1: Clock-to-ouput time changed from 11.5ns to 12ns. Added SMD Designator.

Page 8: Added pinout R7 and R8 to Table 4.

Page 10: Changed pinout R7 and R8 from VSS to NUIL

Page 11: Changed PD from 10 W to 15 W

Page 12: SCRUBEN Device Pin added to Condition column of parameters IIN1 and IIN2

in the DC ELECTRICAL CHARACTERISTICS table

Page 14: The minimum setup times for parameters

tCENS, tWES, and tCSS have

changed from 2.5ns to 3ns, and the maximum output time

for tCQV and tCMV1

changed from 11.5ns to 12ns and tCMV2 changed from 12.5ns to 13ns in the AC

ELECTRICAL CHARACTERISTICS table.

Page 16: Minimum number of tCYC changed from 1 tCYC to 2 tCYC for tSHTDWNS

parameter in the SHUTDOWN AND SLEEP MODE CHARACTERISTICS

TABLE

Pages 20 and 21: Corrected bottom view orientation of package diagram.

Page 24: A correction the Lead Finish section of the SMD ordering encoder page. The

Solder lead finish designator was changed from "A" to "F". Added SMD

designator

April

2015

Ver. 1.9.4

Page 8: Added pinout R13, R14, and R16 to Table 4.

Page 10: Changed pinout R13, R14, and R16 from VSS to NUIL, and P8 from VSS to

VSSQ

UT8SF2M32MCPC Datasheet(PDF) 27 Page - Aeroflex Circuit Technology