UT8SP2M48 datasheet(13/23 Pages) AEROFLEX

13 / 23 page

36-00-01-001

Ver. 1.1.0

Aeroflex Microelectronics Solutions - HiRel

Notes:

* For devices procured with a total ionizing dose tolerance guarantee, the post-irradiation performance is guaranteed at 25oC per MIL-STD-883 Method 1019,

Condition A up to the maximum TID level procured

1. AC Characteristics based on compliance with CLOCK input specifications

2. Supplied as a design guideline, not tested or guaranteed.

3. Period and Cycle to Cycle jitter is defined by JEDEC Standard 65B

4. Maximum data output valid times guaranteed up to 25pf load capacitance. For loads >25pf, a derating factor of parameter = [specification max(ns) + (CLoad -

25pF)(44.2ps/pF].

5. Guranteed by design.

SHUTDOWN AND SLEEP MODE CHARACTERISTICS (Pre and Post-Radiation)*

(VDD= 2.3V to VDDQ, VDDQ = 2.3 to 3.6V; Unless otherwise noted TC is for temperature range ordered.)

Notes:

* For devices procured with a total ionizing dose tolerance guarantee, the post-irradiation performance is guaranteed at 25oC per MIL-STD-883 Method 1019,

Condition A up to the maximum TID level procured

1. The clock must start up prior to exiting sleep or shutdown modes. Parameter is guaranteed by design.

2. TCR is necessary anytime the clock is stopped, after initial power on, or exiting shutdown mode.

3. Tested functionally.

4. Guaranteed by design.

tOEQZ5

OE inactive to output three-state time

4.5

tOEQX5

OE active to output enable time

PARAMETER

DESCRIPTION

CONDITION

MIN

MAX

UNIT

tZZS3

Device operation to SLEEP mode

ΖΖ > VIH

2 tCYC

tZZH3

SLEEP high pulse width

ΖΖ > VIH

100

μs

tZZL3

SLEEP low pulse width

ΖΖ < VIH

100

μs

tSHTDWNS3

Device operation to SHUTDOWN

SHUTDOWN

> VIH

2 tCYC

tZZREC3

SLEEP recovery time

STANDBY < VIL

100 +

(3*tCYC)

tSHTDWNREC1,3 SHUTDOWN recovery time

SHUTDOWN < VIL

tZZI4

Active to SLEEP current

ΖΖ > VIH

100 +

(3*tCYC)

tSHTDWNI4

Active to SHUTDOWN current

SHUTDOWN

> VIH

250

tRZZI4

Time to exit SLEEP current mode

STANDBY < VIL

tRSHTDWNI4

Time to exit SHUDOWN current

mode

SHUTDOWN < VIL

tCR1,2,3

Clock recovery prior to exiting ZZ

ΖΖ > VIH

μs

tRLRH

RESET low to high time

Shutdown < VIL

μs

tPDS3

SLEEP setup time prior to CLK

2.0

tPDH3

SLEEP hold time after CLK

0.5

UT8SP2M48 Datasheet(PDF) 13 Page - Aeroflex Circuit Technology

UT8SP2M48 Datasheet(HTML) 13 Page - Aeroflex Circuit Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Datasheet Download

Link URL