Zero Bias Detector Diode

Rev. V1

MZB600

2

2

MACOM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.

Visit www.macom.com for additional data sheets and product information.

For further information and support please visit:

https://www.macom.com/support

DC-0014119

2

Environmental Capabilities

The MZB600 ZBD Diode is capable of meeting the

environmental requirements of MIL-STD-750 and

MIL-STD-883.

ESD & Moisture Sensitivity Level Rating

These

electronic

devices

are

sensitive

to

electrostatic discharge (ESD) and can be damaged

by

static

electricity.

Proper

ESD

prevention

procedures should be followed. The ESD rating for

this device is Class 0 (HBM).

Assembly Instructions

Die attach of the common anode chip diodes may be

accomplished with eutectic solders, such as

80 Au / 20 Sn, or conductive epoxy. The leads of the

beam lead device may be attached to a hybrid circuit

using thermo compression bonding or conductive

epoxy.

Absolute Maximum Ratings

Parameter

Absolute Maximum

Forward DC Current

100 mA

Reverse DC Voltage

3 V

100 mW

Junction Temperature

+150°C

Operating Temperature

-55°C to +150°C

Storage Temperature

-65°C to +200°C

mW @ 85°C to 0 W @ 175°C.

CS10 / C15P