CT10.241

C-Series

ZM1.WALL Wall mounting bracket

This bracket is used to mount specific Dimension units onto a flat surface without utilizing a DIN-Rail. The two

aluminum brackets and the black plastic slider of the unit have to be removed, so that the two steel brackets can be

mounted.

Fig. 22-1 ZM1.WALL Wall mounting bracket

Fig. 22-2 Assembled wall mounting bracket *)

*)

Picture of the power supply is for representation only

ZM13.SIDE Side mounting bracket

This bracket is used to mount Dimension units sideways with or without utilizing a DIN-Rail. The two aluminum

brackets and the black plastic slider of the unit have to be detached, so that the steel brackets can be mounted.

For sideway DIN-rail mounting, the removed aluminum brackets and the black plastic slider need to be mounted on

the steel bracket.

Fig. 22-3

ZM13.SIDE Side mounting bracket *)

Fig. 22-4

Side mounting with DIN-rail brackets *)

*) Picture of the power supply is for representation only

Jan. 2010 / Rev. 1.3 DS-CT10.241-EN

All parameters are specified at 24V, 10A, 3x400Vac, 25°C ambient and after a 5 minutes run-in time unless otherwise noted.

www.pulspower.com Phone +49 89 9278 0

Germany

16/22