ST72361AR4-Auto datasheet(229/279 Pages) STMICROELECTRONICS

229 / 279 page

ST72361xx-Auto

Electrical characteristics

Doc ID 12468 Rev 3

229/279

19.2.2

Current characteristics

19.2.3

Thermal characteristics

Symbol

Ratings

Maximum value

Unit

IVDD

Total current into VDD power lines (source)

(1)

All power (VDD) and ground (VSS) lines must always be connected to the external supply.

150

IVSS

Total current out of VSS ground lines (sink)

(1)

IIO

Output current sunk by any standard I/O and

control pin

Output current sunk by any high sink I/O pin

Output current source by any I/Os and control

-25

IINJ(PIN)

(2)(3)

IINJ(PIN) must never be exceeded. This is implicitly insured if VIN maximum is respected. If VIN maximum

cannot be respected, the injection current must be limited externally to the IINJ(PIN) value. A positive

injection is induced by VIN>VDD while a negative injection is induced by VIN <VSS. For true open-drain

pads, there is no positive injection current, and the corresponding VIN maximum must always be respected.

Negative injection disturbs the analog performance of the device. See note in Section 20.13: 10-bit ADC

characteristics.

Injected current on VPP pin

±5

Injected current on RESET pin

Injected current on OSC1 and OSC2 pins

Injected current on PB3 (on Flash devices)

Injected current on any other pin(4)

When several inputs are submitted to a current injection, the maximum

I

INJ(PIN) is the absolute sum of the

positive and negative injected currents (instantaneous values). These results are based on

characterization with

I

INJ(PIN) maximum current injection on four I/O port pins of the device.

±5

I

INJ(PIN)

(2)

Total injected current (sum of all I/O and control

pins)(4)

±25

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

-65 to +150

°C

Maximum junction temperature (see Section 21.3: Thermal characteristics)

ST72361AR4-Auto Datasheet(PDF) 229 Page - STMicroelectronics

ST72361AR4-Auto Datasheet(HTML) 229 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL