STM32L063C8 datasheet(119/121 Pages) STMICROELECTRONICS

119 / 121 page

DocID025660 Rev 6

119/121

STM32L063x8

Revision history

120

08-Sep-2015

Removed note 1 in Table 1: Ultra-low-power STM32L063x8 device

features and peripheral counts.

Updated all pinout/ballout schematics to highlight pin/ball supplied

through VDD_USB.

Updated current consumption in Run mode in Section : Features.

Renamed BOOT1 into nBOOT1.

Changed USARTx_RTS into USARTx_RTS_DE and LPUARTx_RTS

into LPUARTx_RTS_DE.

Updated VLCD in section Analog to digital converter (ADC).

ADC no more available in Low-power run and Low-power Sleep modes

in Table 4: Functionalities depending on the working mode (from

Run/active down to standby).

Updated Figure 4: STM32L063x8 LQFP48 pinout - 7 x 7 mm and

Figure 3: STM32L063x8 LQFP64 pinout - 10 x 10 mm. Changed I/O

structure for PC5 in Table 15: STM32L063x8 pin definitions.

Updated VDD_USB in Table 24: General operating conditions.

Changed temperature condition in Table 7: Internal voltage reference

measured values and Table 26: Embedded internal reference voltage

calibration values.

Updated TCoeff in Table 27: Embedded internal reference voltage.

Added note related to Standby mode in Table 39: Peripheral current

consumption in Stop and Standby mode.

Updated Figure 13: IDD vs VDD, at TA= 25/55/ 85/105/125 °C, Low-

power run mode, code running from RAM, Range 3, MSI (Range 0) at

64 KHz, 0 WS, Figure 14: IDD vs VDD, at TA= 25/55/ 85/105/125 °C,

Stop mode with RTC enabled and running on LSE Low drive and

Figure 15: IDD vs VDD, at TA= 25/55/85/105/125 °C, Stop mode with

RTC disabled, all clocks off.

Updated Table 40: Low-power mode wakeup timings.

Updated MSI oscillator temperature frequency drift in Table 48: MSI

oscillator characteristics.

Updated Table 53: EMS characteristics and Table 54: EMI

characteristics.

Added tUP_LDO in Table 62: ADC characteristics.

Updated Table 57: I/O current injection susceptibility, Table 58: I/O

static characteristics (Ilkg) and Table 60: I/O AC characteristics.

Section : Input/output AC characteristics: updated introduction and

Table 71: I2C analog filter characteristics.

Updated Figure 28: SPI timing diagram - slave mode and CPHA = 0,

Table 73: SPI characteristics in voltage Range 1, Table 74: SPI

characteristics in voltage Range 2 and Table 75: SPI characteristics in

voltage Range 3 and Table 76: I2S characteristics.

Added Section : Device marking for LQFP64 and Section : Device

marking for LQFP48.

Table 85. Document revision history (continued)

Date

Revision

Changes

STM32L063C8 Datasheet(PDF) 119 Page - STMicroelectronics

STM32L063C8 Datasheet(HTML) 119 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL