Application Information
The TPCI100 is a standard 33 MHz 32 bit PCI Carrier for up to two single-size or one double-size IndustryPack (IP) modules allowing to build up modular, flexible and cost effective I/O solutions for all kinds of applications like process control, medical systems, telecommunication and traffic control.
Two 50 pin 0.1 inch flat ribbon cable connectors provide access to all IP I/O lines. Status indicators for IP access, +5V and +/-12V are provided.
The TPCI100 can operate with 3.3V and 5.0V PCI I/O signaling voltage for I/O. This guaranties compatibility with nearly all PC mainboards. 3.3V required by on board logic is generated locally.
All IP interrupt request lines are mapped to PCI INTA. For fast interrupt source detection, the TPCI100 provides a special IP interrupt status register.
The IP power lines are fuse protected by self healing fuses and RF filtered. The operating temperature range is -40°C to +85°C.
Software Support (CARRIER-SW-xx) for different operating systems is available.