SH7041A datasheet(732/923 Pages) RENESAS

732 / 923 page

694

• Bit 3—Erase-Verify 2 (EV2): Selects erase-verify mode transition or release (applicable

addresses: H'20000–H'3FFFF). Do not set the ESU2, PSU2, PV2, E2, or P2 bit at the same

time.

Bit 3: EV2

Description

Erase verify mode release (Initial value)

Transition to the erase verify mode

[Setting condition] When FWE=1 and SWE=1

• Bit 2—Program-Verify 2 (PV2): Selects program-verify mode transition or release (applicable

addresses: H'20000–H'3FFFF). Do not set the ESU2, PSU2, EV2, E2, or P2 bit at the same

time.

Bit 2: PV2

Description

Program verify mode release (Initial value)

Transition to the program verify mode

[Setting condition] When FWE=1, and SWE=1

• Bit 1—Erase 2 (E2): Selects erase mode transition or release (applicable addresses: H'20000–

H'3FFFF). Do not set the ESU2, PSU2, EV2, PV2, or P2 bit at the same time.

Bit 1: E2

Description

Erase mode release (Initial value)

Transition to the erase mode

[Setting condition] When FWE=1, SWE=1, and ESU2=1

• Bit 0—Program 2 (P2): Selects program mode transition or release (applicable addresses:

H'20000–H'3FFFF). Do not set the ESU2, PSU2, EV2, PV2, or E2 bit at the same time.

Bit 0: P2

Description

Program mode release(Initial value)

Transition to the program mode

[Setting condition] When FWE=1, SWE=1, and PSU2=1

SH7041A Datasheet(PDF) 732 Page - Renesas Technology Corp