STM32H753II datasheet(355/361 Pages) STMICROELECTRONICS

355 / 361 page

Revision history

STM32H753xI

354/360

DS12117 Rev 8

18-May-2018

Updated LSI clock frequency and ADC on cover page. Removed note related to

UFBGA169 package.

Updated ADC features on cover page and in Table 2: STM32H753xI features and

peripheral counts.

Added Arm trademark notice in Section 1: Introduction.

Updated USB OTG interfaces to add crystal-less capability.

Updated Figure 1: STM32H753xI block diagram.

Updated GPIO default mode in Section 3.8: General-purpose input/outputs (GPIOs).

Added ADC sampling rate values in Section 3.17: Analog-to-digital converters

(ADCs).

Updated Section 3.18: Temperature sensor.

Updated LCD-TFT FIFO Size in Section 3.25: LCD-TFT controller.

Section 3.34: Serial peripheral interfaces (SPI)/integrated interchip sound interfaces

(I2S): changed maximum SPI frequency to 150 Mbits/s.

Modified number of bidirectional endpoints in Section 3.41: Universal serial bus on-

the-go high-speed (OTG_HS).

Table 8: Pin/ball definition:

– Updated PC14 and PC15 function after reset.

– Changed CAN1_TX/RX to FDCAN1_TX/RX and CAN1_TXFD/RXFD to

FDCAN1_TXFD_MODE/RXFD_MODE

– Changed CAN2_TX/RX to FDCAN2_TX/RX and CAN2_TXFD/RXFD to

FDCAN2_TXFD_MODE/RXFD_MODE

Replaced VCAP1/2/3 and VDDLDO1/2/3 by VCAP and VDDLDO, respectively.

Updated PA0, PA13, PA14, PC14 and PC15 pin/ball signals in pinout/ballout

schematics.

Replaced fACLK by frcc_c_ck in Section : Typical and maximum current consumption.

Replaced system clock by CPU clock and fACLK by frcc_c_ck in Section : On-chip

peripheral current consumption.

Updated Note 2. in Table 26: Reset and power control block characteristics.

Updated Table 27: Embedded reference voltage, Table 29: Typical and maximum

current consumption in Run mode, code with data processing running from ITCM,

regulator ON, Table 30: Typical and maximum current consumption in Run mode,

code with data processing running from Flash memory, cache ON, regulator ON and

Table 35: Typical and maximum current consumption in Stop mode, regulator ON.

Updated typical and maximum current consumption in Table 36: Typical and

maximum current consumption in Standby mode and Table 37: Typical and

maximum current consumption in VBAT mode.

Added note to fLSI in Table 48: LSI oscillator characteristics.

Table 230. Document revision history

Date

Revision

Changes

STM32H753II Datasheet(PDF) 355 Page - STMicroelectronics

STM32H753II Datasheet(HTML) 355 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

Datasheet Download

Link URL