720XP-1RU datasheet(12/37 Pages) ARISTA

12 / 37 page

Chapter

Rack Mounting the Switch

This section provides instructions on how to rack mount the switch.

•

Two-Post Rack Mount

Note: The rack mounting procedure is identical for all switches this guide covers. Illustrations in this

chapter depict the mounting of a DCS-7010T-48 switch.

Les procédure de montage du bâti est identique pour tous les commutateurs visés par ce guide.

Illustrations dans ce chapitre montrent le montage d’un interrupteur de DCS-7010T-48.

Note: Illustrations use a representative Arista switch. Your device may be differ in appearance.

3.1

Two-Post Rack Mount

This section provides instructions for mounting the switch in a two-post rack.

To mount the switch onto a two-post rack, assemble the mounting brackets to the chassis, then attach the

brackets to the rack posts. Two-post accessory kits include the following parts:

•

2x mounting brackets

•

6x M4x5 flat head Phillips screws.

The following image displays the proper bracket placement for the rack mount.

Figure 3-1: Bracket Mount Placement for Rack Mount

3.1.1

Attaching Mounting Brackets to the Chassis

This section discusses the steps to attach mounting brackets to the chassis.

The following figure displays the front bracket alignment for mounting the switch into a four-post rack.

720XP-1RU Datasheet(PDF) 12 Page - Arista Networks, Inc