720XP-1RU datasheet(13/37 Pages) ARISTA

13 / 37 page

Rack Mounting the Switch

Figure 3-2: Attaching the Mounting Brackets to the Switch Chassis

1 Attaching brackets for the front mount

1. Align the mounting brackets with the attachment pins to obtain the desired mounting position.

2. Place the bracket flush on the chassis with attachment pins protruding through key openings.

3. Slide the bracket towards the front flange until the bracket clip locks with an audible click.

To remove the mounting bracket from the chassis, lift the front edge of the mounting bracket clip

with a flathead screwdriver and slide the bracket away from the front flange (opposite from the

installation direction).

3.1.2

Inserting the Switch into the Rack

This section describes the steps to insert the switch into the rack.

1. Lift the chassis, with the brackets attached, into the rack.

2. Position the flanges against rack posts.

3. Select mounting screws that fit your equipment rack.

4. Attach the bracket flanges to the rack posts.

Figure 3-3: Inserting the Switch into the Rack

720XP-1RU Datasheet(PDF) 13 Page - Arista Networks, Inc